Hach, nett, grade bekomme ich die Nachricht, daß es wohl noch etwas dauern wird, bis mein bestellter GuruPlug endlich eintrifft:
We have had an update from the shipping company in Hong Kong, Globalscale have only sent half of our order that we are due to receive later this week.
[…] Globalscale have said the reason for the part delivery is due to QA issues with the power supply’s in the units (which I am sure some of you have read about already), therefore they have started to have new power supply’s delivered in and are replacing the power supply’s in the units that have been ordered by customers.
[…] We will be working through the pre orders the fairest way possible, starting with the orders that were placed the earliest, but as mentioned above, we will have to work on what power types we are sent. […]
Tja, da ich erst relativ spät mich entschieden hatte, doch vorzubestellen (und das JTAG-Board gratis zu bekommen), werde ich mich jetzt wohl noch länger in Geduld üben müssen — andererseits, was man so liest, sind die ersten GuruPlugs auch mehr so Heißnadel-Geräte, und daß die von Globalscale verbauten Netzteile im SheevaPlug rottig sind, durfte ich ja bei 50% meiner beiden SheevaPlugs schon selbst feststellen.
Also erstmal weiter Valium einwerfen und sediert auf den neuen Plug warten ;) *Soifz*
FYI: mein GuruPlug Server Plus (inkl. Jtag) bestellt bei Dr. Bott ist heute via UPS Express angekommen
Gratuliere!
Seit der Pleite mit »United Mobile« bin ich eher skeptischer als vorher; aber mal sehen, NewIT hat ja noch was nachgeschoben:
Aber schon merkwürdig, daß eine Lieferung in D eintrifft, in UK, die ja eigentlich früher schon Reseller von GS waren, nur eine Teillieferung und das Wochen verspätet … Irgendwie nicht stimmig, aber ich will lieber nicht unken ;)
Meins wird zum Glück nur Handwarm (nach 45 min Laufzeit).
LAN (100Mbit) geht auch ohne Reboot Loop
Dmesg:
Linux version 2.6.32-00007-g56678ec (root@msi-linux-build.marvell.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33.fa1)) #1 PREEMPT Mon Feb 8 03:49:55 PST 2010
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Marvell Plug2L Reference Board
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c05881c8, node_mem_map c065f000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 130048 pages, LIFO batch:31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256MB 256MB = 512MB total
Memory: 513024KB available (5144K code, 1034K data, 148K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:114
Console: colour dummy device 80×30
Calibrating delay loop… 1192.75 BogoMIPS (lpj=5963776)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Kirkwood: MV88F6281-A1, TCLK=200000000.
Feroceon L2: Cache support initialised.
initial MPP regs: 01111111 11113311 33331111 33333333 00003333 00000222 00000000
final MPP regs: 01111111 11113311 33331111 33333333 00003333 00000222 00000000
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq – end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz – 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz – 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz – 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz – 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz – 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
JFS: nTxBlock = 4010, nTxLock = 32080
msgmni has been set to 1002
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 1
scsi0 : sata_mv
ata1: SATA max UDMA/133 irq 21
NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 3144 at 0x000018900000
Creating 3 MTD partitions on “orion_nand”:
0x000000000000-0x000000100000 : “u-boot”
0x000000100000-0x000000500000 : “uImage”
0x000000500000-0x000020000000 : “root”
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned 512)
UBI: data offset: 2048
ata1: SATA link down (SStatus 0 SControl F300)
UBI warning: ubi_eba_init_scan: cannot reserve enough PEBs for bad PEB handling, reserved 39, need 40
UBI: attached mtd2 to ubi0
UBI: MTD device name: “root”
UBI: MTD device size: 507 MiB
UBI: number of good PEBs: 4055
UBI: number of bad PEBs: 1
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 4055
UBI: number of PEBs reserved for bad PEB handling: 39
UBI: max/mean erase counter: 2/0
UBI: image sequence number: 0
UBI: background thread “ubi_bgt0d” started, PID 454
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:50:43:01:88:9a
net eth1: port 0 with MAC address 00:50:43:01:88:9b
ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver…
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
mice: PS/2 mouse device common for all mice
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
Registered led device: plug2l:red:health
Registered led device: plug2l:green:health
Registered led device: plug2l:red:wmode
Registered led device: plug2l:green:wmode
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
mmc0: new high speed SDIO card at address 0001
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm ‘NULL’
Gating clock of unused units
before: 0x00dfc3fd
after: 0x00cf41d9
rtc-mv rtc-mv: setting system clock to 2010-05-18 13:39:28 UTC (1274189968)
usb 1-1: new high speed USB device using orion-ehci and address 2
UBIFS: mounted UBI device 0, volume 0, name “rootfs”
UBIFS: file system size: 516225024 bytes (504126 KiB, 492 MiB, 4001 LEBs)
UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: zlib
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:13.
Freeing init memory: 148K
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using orion-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
libertas_sdio mmc0:0001:1: firmware: requesting sd8688_helper.bin
libertas: can’t load helper firmware
libertas: failed to load helper firmware
libertas_sdio: probe of mmc0:0001:1 failed with error -2
Bluetooth: vendor=0x2df, device=0x9105, class=255, fn=2
btmrvl_sdio mmc0:0001:2: firmware: requesting sd8688_helper.bin
btmrvl_sdio_download_helper: request_firmware(helper) failed, error code = -2
btmrvl_sdio_download_fw: Failed to download helper!
btmrvl_sdio_probe: Downloading firmware failed!
scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 9909 PQ: 0 ANSI: 0
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Attached SCSI removable disk
scsi 1:0:0:1: Direct-Access Generic STORAGE DEVICE 9909 PQ: 0 ANSI: 0
sd 1:0:0:1: Attached scsi generic sg1 type 0
sd 1:0:0:1: [sdb] Attached SCSI removable disk
usb-storage: device scan complete
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: link up, 100 Mb/s, full duplex, flow control disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
Moin,
also mein Guruplug hat genau 10 Minuten funktioniert! :(
Dann ist das Netzteil abgeraucht …
Nun warte ich immernoch auf Nachricht von Globalescale, ich bin gespannt.
dir ein wenig mehr Glück mit dem Guru…
gruss Heiko
Mit Chance sollte er Mittwoch hier sein:
Mit einer niedrigenden 1000er Nummer von Mitte März sollte das schwarze Schätzchen also nächste Woche eintreffen *freu* ;)